• Αθ. Σταγειρίτη 7, Πυλαία Θεσ/νίκης
  • +30 2310 942346

Ποιότητα

σε υλικά & κατασκευή

Φούρνοι οδοντοτεχνικής

KERAMOS 1650-Dental Zirconia Sintering Furnace-Lift Model 1650C-MoSi2 Heaters

Κατηγορίες: Κωδικός: Keramos 1650
Keramos 1650 with maximum continuous operation temperature of 1650 ˚C was specially designed for Zirconium Dioxide (ZrO2) restorative dentistry.
The furnace is heated through the super clean Kanthal HT Molybdenum Di-silicide elements. The ultrahigh purity of this elements in addition to the low bulk evaporation rate significantly reduce the risk of translucent Zirconia discoloration. Zirconia crowns unafraid treated inside the chamber without the need for covering.
The system programming is open and is suitable for various supplier materials. Windows architecture KeraWorks Software provide friendly and easy to use programming and monitoring environment.

Βασικά χαρακτηριστικά

  • Unlimited open programing options for conventional or speed sintering, predrying, fast cooling and other.
  • Real time graphical presentation of executed program. Data file creation for all executed programs.
  • Specially designed for unattended operation, can be programmed to start and finish a program overnight.
  • In depended Temperature watchdog operation insures ultimate safety in cases of unattended operation.
  • Battery uninterrupted power supply backup recovers program after short term power failure
  • Large capacity heating chamber. Up to two sintering bawls (120 x 35mm) can stacked together.
  • Small footprint and lightweight construction saves valuable laboratory space. Easily moved.

Προδιαγραφές

  • Maximum Sintering Temperature: 1650 ˚C.
  • Operating Power: 208 /240VAC – 50/60Hz.
  • Maximum Power: 2200 W.
  • Weight: 60 Kg.
  • Resistors type: MoSi2 Kanthal HT ultra clean, fully exposed.
  • External dimensions: 400mm width, 490mm depth, 680mm height.
  • Useful heated chamber dimensions: 120mm diameter, 100mm height.
  • Two in depended R type embedded temperature probes for controller and over-temperature limiter feedback.
  • Temperature control setting resolution 0.1 ˚C. Typical control fluctuation ±0.1 ˚C.
  • Maximum Temperature heat up rate:
40 ˚C /min with two sintering bowl sets,
70 ˚C/min with single sintering bowl set.

Μοντέλα

Standard Package
  • Keramos 1650 furnace body
  • Windows10, 8΄΄Tablet PC with KeraWorks software, and mounting stand.
  • ZTA Conventional Speed Sintering Bowl Set 120x35mm (one bowl with lid)
  • YSZ sintering beads, 2.00 mm (200gr)
  Part/No....……………..…..Keramos 1650_V1.2

Options
  • ZTA Conventional Speed single Sintering Bowl
Part/No………………..…............ZTA-SB-C-120
  • ZTA Conventional Speed Sintering Bowl Set
Part/No…………………………...ZTA-SS-C-120
  • ZTA High Speed Sintering Bowl Set
Part/No……………………..........ZTA-SS-S-120
Επάνω