• Αθ. Σταγειρίτη 7, Πυλαία Θεσ/νίκης
  • +30 2310 942346

Ποιότητα

σε υλικά & κατασκευή

Φούρνοι οδοντοτεχνικής

KERAMOS M-Dental Zirconia Sintering Furnace-1650C-MoSi2 Heaters

Κατηγορίες: Κωδικός:
Keramos M series with maximum continuous operation temperature of 1650 ˚C is a furnace specially designed for Zirconium Dioxide (ZrO2) Dental Restorations sintering.
The furnace is a stand-alone device equipped with embedded controllers and electrical circuits to perform a Zirconia sintering program. Standard equipped with a Digital LCD display temperature controller providing 15 step programming with 1 program storage.
A Windows Tablet PC optionally delivered with the furnace running the specially designed KeraWorks Software, or any other computer, use as a human interface to the device. After programming and downloading the program to the furnace processor the computer could be disconnected and re-connected any time without interrupting the executed program.
The system programming is open and is suitable for various supplier materials. Windows architecture KeraWorks Software provide friendly and easy to use programming and monitoring environment.
The furnace is heated through the Kanthal Molybdenum Di-silicide elements. The high purity of this elements in addition to the low bulk evaporation rate significantly reduce the risk of translucent Zirconia discoloration.
The furnace package includes a set of Zirconia Toughened Alumina Sintering Bowl and Lid.
 

Προδιαγραφές

  • Maximum/continuous temperature 1650 ˚C.
  • Operating Power:
          115 VAC – 50/60Hz.
          230 VAC – 50/60Hz
  • B type (PtRh/Rt) embedded thermocouple. Resolution 0.1 °C
  • Temperature control accuracy ±1 ˚C.
  • Resistors type: Kanthal Super, MoSi2, fully exposed.

Μοντέλα

Standard Package
  • Keramos M furnace body
  • 8΄΄ Tablet PC with Windows10
  • Sintering Bowl Set
 
 Model No Heated Volume (Liters) Max. Sintering Bowl Capacity
 KERAMOS M1 1 2
 KERAMOS M2 2 3
Doc No. Keramos M January 2019
 
Options
  • Power Safe module. Battery uninterrupted power supply backup system. Recovers program after short term power failure.
  • Programmable Stand-alone over temperature limiter.
  • Thermocouple Calibration Package.
Additional Sintering Bowl
  • ZTA Sintering Bowl Diameter 120mm, P/N: ZTA-SB-C-120
  • ZTA Bowl Lid Diameter 120mm, P/N:ZTA-SL-C-120
  • ZTA Sintering Bowl Diameter 100mm, P/N: ZTA-SB-C-100
  • ZTA Bowl Lid Diameter 100mm, P/N:ZTA-SL-C-100
Επάνω